作者：L. Xu, Z. Fang, P. Song, M. Peng*
关键字：Multi-walled carbon nanotubes, Corona discharge, heat treatment, hydrophobicity, epoxy
论文来源：期刊
具体来源：Applied Surface Science, 2010.8, 256, 21: 6447-6453
发表时间：2010年

Multi-walled carbon nanotubes (MWCNTs) were modified by corona discharge and then heat-treated in the air. The influences of corona discharge parameters such as treatment time and processing power were investigated. The results of energy dispersive x-ray analysis (EDX) and thermogravimetric analysis (TGA) indicated the introduction of oxygen-containing functional groups onto the surface of the MWCNTs after heat treatment. The water contact angle tests showed that the hydrophobicity of the MWCNTs was decreased to some extent. The static water contact angle was reduced from 146 ^o to 122 ^o when the time of the corona discharge treatment reached 3 min at the processing power of 200 W. The enhanced thermomechanical and mechanical properties of epoxy nanocomposites filled with the corona-discharge treated MWCNTs were observed. The modified MWCNTs conferred better properties on the composites than the pristine MWCNTs because of the improved dispersion of MWCNTs in matrix and the enhanced interfacial interaction between the treated MWCNTs and epoxy.