作者：Yin Liu, Xinlong Fan, Xiangkun Jia, Xin Chen, Aibo Zhang, Baoliang Zhang*, Qiuyu Zhang*
关键字：Adsorption，Antibiotics，External cross-linking，In situ oxidation，Magnetic hyper-cross-linked polymers
论文来源：期刊
具体来源：DOI: 10.1021/acssuschemeng.7b02252
发表时间：2018年
A novel method for fabricating magnetic hyper-cross-linked polymers (MHCPs) with high Brunauer–Emmett–Teller (BET) specific surface area, large pore volume, and good magnetic properties was developed. The synthesis process of MHCPs included two steps: the preparation of HCPs by external cross-linker and the in situ oxidation of the iron source in the structure of HCPs. On the basis of the systematic investigation of the influences of oxidation time and amount of hydrogen peroxide added, a series of MHCPs with different specific surface area, pore volume, and magnetic responsiveness was controllably prepared with the highest BET specific surface area and maximum saturation magnetization of 729.93 m2/g and 12.4 emu/g, respectively. Furthermore, the adsorption performance of MHCPs with antibiotics was studied by using chloramphenicol (CAP) and tetracycline hydrochloride (TC) as model adsorbates. The kinetics isotherms of CAP and TC followed a pseudo-second-order model, and the adsorption isotherms of them were proved to fit the Langmuir adsorption model. The maximum adsorption capacity of CAP and TC at the temperature of 20 °C could reach 114.94 and 212.77 mg/g, respectively. The above results showed that the MHCPs would be one of the most promising candidates for application in the adsorption of antibiotics.